Dongguan Zhongli Instrument Technology Co., Ltd.
Providing one-stop service for global laboratories, customer's satisfaction is our ultimate goal！
Add to Cart
Professional Rubber Test machine , Limiting Oxygen Index Tester
1. Meet standards:
Limiting Oxygen Index Tester meet according to the national standard GB2406 stipulated conditions of manufacture of an instrument.
2. Product summary:
Limiting Oxygen Index Tester used to determine the polymer to the desired oxygen concentration (volume percent) in the combustion process. The instrument is simple, easy to operate, through the sensor (import) measurement, the figures show the results,do not have to be calculated by the formula. This machine can be used as combustion performance as a means of identification of polymer can be used as a research
tool in order to obtain a better understanding of the combustion process of the polymer.
3. Applicable industry:
Limiting Oxygen Index Tester applies to the burning of plastics, rubber, foam and other materials performance test, its results are accurate, the reproducibility is good. Research, test equipment essential for the production of flame retardant material.
4. Defined:
Limiting Oxygen Index Tester under the conditions specified, the materials in the minimum oxygen concentration required for combustion of oxygen and nitrogen mixed gas stream. To represent the oxygen
percentage of the volume occupied by the value. The oxygen index is high that the material is nonflammable,
low oxygen index of said material is highly flammable and is generally believed that the oxygen index of <22 is
a flammable material, oxygen index between 22 --- 27 is a combustible material, oxygen index> 27 is a flame
retardant materials.
5. Technical parameters:
| Model | Limiting Oxygen Index Tester |
| Combustion tube inner diameter | 100mm |
| High combustion tube | 450mm |
| Flowmeter accuracy | 2.5 grade |
| Pressure gauge accuracy | 2.5 grade |
| Gas source | GB3863 prescribed oxygen,GB3864 prescribed nitrogen |
| Test environment | Temperature:10—35℃ , Humidity:45%—75% |
| Input pressure | 0.2—0.3Mpa |
| Working pressure | 0.05—0.15Mpa |
| Sample type | Self-supporting material and non-self-supporting material |
| Display | Digital |
