Dongguan Zhongli Instrument Technology Co., Ltd.
Providing one-stop service for global laboratories, customer's satisfaction is our ultimate goal！
Add to Cart
-70C~+150C Laboratory Simulated Climate Temperature And Humidity Control Chamber
Equipment summary:
Constant temperature and humidity test chamber, also known as constant temperature and humidity test machine, constant temperature and humidity test chamber, programmable hot and humid alternating test chamber, constant temperature machine or constant temperature and humidity chamber, used to test the performance of materials in a variety of environments and test a variety of materials heat resistance, cold resistance, dry resistance, moisture resistance performance. Suitable for electronics, electrical appliances, cell phones, communications, instruments, vehicles, plastic products, metal, food, chemical, building materials, medical, aerospace and other products for testing quality
Environmental Test Chamber Catalog:
Environmental Test Chamber.pdf
Control Characteristics:
The control system of the test chamber can be said to be the heart of the whole equipment, in charge of refrigeration, heating, humidity control, circulation, control and other powers.
In terms of refrigeration, the compressor is imported from Germany. Refrigeration system consists of high temperature part and low temperature part, each part is a relatively independent refrigeration system. The evaporation of refrigerant in the high-temperature part absorbs heat from the refrigerant in the low-temperature part and vaporizes; the evaporation of refrigerant in the low-temperature part absorbs heat from the object to be cooled (the air inside the testing machine) to get the cold quantity. The high-temperature part and the low-temperature part are linked by an evaporative condenser, which is both the condenser of the high-temperature part and the condenser of the low-temperature part.
Corresponding standard:
1.International Electrotechnical Commission Standard:
IEC68-2-03_test method Ca_Steady damp-heat
IEC68-2-01_test method A_cold
IEC68-2-02_test method B_dry heat
2. Military Standards:
MIL-STD-810F-507.4 humidity
MIL-STD-810F-501.4 high temperature
MIL-STD-810F-502.4 low temperature
MIL-STD883C test method 1004.2 temperature and humidity cycling test
MIL-STD810D test method 502.2
MIL-STD810 test method 507.2 procedure 3
3. Japanese Industrial Standard:
JIS C60068-2-3-1987 test method Ca: Steady damp-heat
JIS C60068-2-2-1995 test method B:dry heat
JIS C60068-2-1-1995 test method A:low temperature
4. USA Semiconductor Industry Standard:
JESD22-A101-B-2004 Constant temperature and humidity test
JESD22-A103-C-2004 High Temperature Storage Test
JESD22-A119-2004 Low Temperature Storage Test
5. Chinese National Standard:
GB11158 Technical conditions for high-temperature testing box
GB10589-89 Technical conditions for low-temperature testing box
GB10592-89 Technical conditions for high and low temperature testing box
GB/T10586-89 technical conditions for humidity testing chamber
GB/T2423.1-2001 Low-temperature testing methods
GB/T2423.2-2001 High-temperature testing methods
GB/T2423.3-93 Testing Method for humidity Test Chamber
GB/T2423.4-93 Alternating hot and humid testing method
GB/T2423.22-2001temperature testing method
6. China's National Military Environment Test Equipment
GJB150.3 high-temperature testing
GJB150.4 low-temperature testing
GJB150.9 hot and humid condition testing
Detailed parameters:
| Model | ZL-80 (A~G) | ZL-150 (A~G) | ZL-225 (A~G) | ZL-408 (A~G) | ZL-608 (A~G) | ZL -800 (A~G) | ZL-1000 (A~G) |
| Inside size WxHxD (cm) | 40x50x40 | 50x60x50 | 50x75x60 | 60x85x80 | 80x95x80 | 100x100x80 | 100x100x100 |
| Outside size WxHxD (cm) | 100x170x87 | 105x175x97 | 115x190x97 | 135x195x115 | 145x185x137 | 145x210x130 | 147x210x140 |
| Temperature range | -70℃~+100℃(150℃) (A:+25℃ B:0℃ C:-20℃ D:-40℃ E:-50℃ F:-60℃ G:-70℃) | ||||||
| Humidity range | 20%~98%R.H.(10%-98%R.H/5%~98%R.H is the specific condition) | ||||||
| Accuracy/ uniformly | ±0.1℃；±0.1%R.H./ ±1.0℃；±3.0%R.H. | ||||||
| Accuracy / volatility | ±1.0℃；±2.0%R.H./ ±0.5℃；±2.0%R.H. | ||||||
| Heating / cooling time | About 4.0℃/min；about 1.0℃/min(5~10℃/mm is the specific condition) | ||||||
| Inside material | Stainless steel SUS 304# | ||||||
| Insulation material | High-temperature high-density amino acid ethyl ester foam insulation materials, | ||||||
| Cooling system | Air-cooled/ single-stage compressor(-20℃) ,wind, water cooled/two-stage compressor(-40℃~-70℃) | ||||||
| Protection | compressor overload switch, high and low pressure protection switch, over-humidity-temperature protection switches, fuses, warning system | ||||||
| Accessories | recorder(purchase),view window,50mm testing hole,PL lamp,clapboard,Dry and wet gauze ball | ||||||
| Controller | TEMI300 digital controller from South Korea | ||||||
| Compressor | France Tecumceh | ||||||
| Power | 1Φ 220VAC±10% 50/60Hz & 3Φ 380VAC±10% 50/60Hz | ||||||
ZL-6004 Following list of the programmable constant temperature and humidity testing machine:
| Structure | material | Model | From | description |
| Box | Shell | Stainless steel SUS304B | import | Antirust |
| Liner | Stain steel SUS304B | import | Antirust | |
| insulation | Rigid polyurethane foam, ultra-fine glass fiber | Hongkong | insulation | |
| Door | Stainless steelSUS304B | import | Good sealing performance | |
| View window | 38026 insulating glass | Observed the testing sample | ||
| Frame | Stainless steel ring | export | Diameter 8mm | |
| Testing hole | Diameter 60MM | Wire through directly | ||
| Heating system | Heating pipe | Stainless steel heat sink | Hongkong | Storage’s temperature rise up |
| Air circulation system | Fan | YYF100-25-4S | Japan | Storage back to ring |
| Cooling
system | Compressor | CAJ2464 | France | cooling |
| Condenser | Tecumceh | France | Storage back to ring | |
| Coolant | R23/404/environmentally | United States | cooling | |
| Electromagnetic valve | 1028/3 Castor | Italy | Refrigerant opening and closing | |
| Expansion valve | TY2 Danfoss | United States | Refrigerator throttling | |
| Filters | 0835 Danfoss | United States | Filter oxide cooling pipe | |
| Humidity system | Humidity tube | Stainless steel | 304 import | The effective protection of laboratory humidity |
| Humidity box | Made by oneself | Provide temperature |