Dongguan Zhongli Instrument Technology Co., Ltd.
Providing one-stop service for global laboratories, customer's satisfaction is our ultimate goal！
Add to Cart
LCD Screen XHTC500 Thermoplastic Cut-Through Tester With Two Test Methods
Product overview:
• It refers to the standards of NEMA and JIS.
• It is applied to test round enameled and filmed wires with conductor nominal diameters from 0.1mm to 2.5mm.
• It supplies two test methods: heated method and constant temperature method.
• When the sample is cut through, the tester will discharge load and give an alarm automatically and display test time and temperature.
• It forces axial-flow fan to cool tester automatically so that the second test can be carried out quickly without long-time waiting.
• All the testing data and the sample characteristics value can be transfer to computer automatically, the MPS6 enameled wire quality data managerment system can save and analysis these data.
• The LCD screen can indicate the testing steps and display the testing result.
Parameters:
| Dimension of Heating Mould | 100×100×70mm |
| Test Voltage Between Two Samples | AC100±10V |
| Cutting- through Current | 5±0.5mA |
| Short-Circuit Current Between Samples | ＜50mA |
| Error Between the Displayed Temperature and the Sample’s Temperature | <2℃ |
| Test or Preheating Time | 1” ～ 99'59” predetermined |
| Included Angle Between Heating Mould’s Two Winding Slots | 90° |
| 120 Seconds Error Allowance of Timing Device | ±2s |
| Highest Test Temperature | ≤500℃ |
| Test Temperature of Constant Temperature Method | room temperature to 500℃ preset |
| Input Power Supply | AC220V±10% 50Hz |
| Heating Power | 750W |
| Dimension | L×W×H 520×320×500 mm |
| Weight | 35Kg |