Dongguan Zhongli Instrument Technology Co., Ltd.
Providing one-stop service for global laboratories, customer's satisfaction is our ultimate goal！
Add to Cart
ZL-2719 ZDCY-80 Resistance Tester.pdf
• Implementation Standard: IEC60851-5
• It is made up of DC low resistance tester and DC resistance test clamp, and the latter has the function of sample alignment.
• LCD screen can display all the parameters and test results, and choose test lever according to sample’s resistance automatically.
• If you set current temperature, it will commute the test results into 20℃ resistance.
• It has two types of test clamps: electric potential clamps and current clamps, and equipped with sample calibration device.
• It is applicable to test copper and aluminum wires with conductor nominal diameters less than 8.0mm.
• You can test other conductor’s resistance with clamps.
Alternative model: ZDCY-10 Resistance Tester
DSJ-10 Clamps for resistance test
DSJ-80 Clamps for resistance test
Parameters:
| Test Length(Distance between the two electric potential clamps) | (1000±1)mm |
| Distance Between Electric Potential Clamp and Current Clamp) | 50mm |
| Blade Width of Electric Potential Clamps | ≤2mm |
| Error of Testing Length | ±0.1mm |
| Analyzing Degree | 10μΩ |
| Testing Range | 10μΩ-20KΩ |
| Precision Class | Four valid digits |
| Precision(20±5℃) | ≤±0.2% |
| Input Power Supply | AC220V±10% 50Hz |
| Consumed Power | ≤60W |
| Dimension | L×W×H 1350×260×300mm |
| Weight | 27Kg |