ISO 10545 Digital Display Type Ceramic Vacuum Water Absorption Tester
Product Introduction:
This instrument complies with GB/T3810.3-2016 and ISO10545-3-1995 water absorption, apparent porosity, apparent relative density and bulk density measurement The ratio, apparent porosity, and bulk density were measured. It also meets the measurement conditions of GB/T3299-2011 "Determination of Water Absorption Rate of Ceramics for Daily Use".
The instrument can also be used to determine the water absorption of bricks, cement products, etc.
Technical Parameter
1. Vacuum degree: local atmospheric pressure (unit MPa) - (minus) 0.01MPa.
2. Volume: Ф250 × 300mm
3. Vacuuming time: 0-99 minutes 59 seconds continuously adjustable 0-99
4. Water injection time: 0-99 minutes 59 seconds continuously adjustable 0-99
5. Repeatability error: <5%
6. Time digital display
7. Voltage: 220V, 50HZ
The structure and composition of the instrument
The instrument adopts an electromechanical integration structure and consists of a vacuum container, a distilled water container, a vacuum pump, a vacuum gas injection valve, an electromagnetic water inlet valve, a water discharge valve, and a digital controller.
Machine Certificate:
Business license Fame Certificates Wall
Factory environment area:
Company outdoor view Reception
Sales Team and Technicial Team:
Exhibition:
